凹形树突状PtCu纳米催化剂的合成及对甲醇电催化的研究

以邻苯二胺为表面活性剂,通过水热釜法一步制备凹形树突状PtCu双金属纳米催化剂(PtCu NCDs)。PtCu NCDs在电催化甲醇氧化(MOR)的应用中表现出非常高的活性和很强的抗有毒中间体作用。PtCu NCDs对于甲醇氧化的质量活性为(0.53 A·mg^-1 Pt)是商业Pt/C(0.26 A·mg^-1 Pt)的2.04倍。从比活性的CV曲线图对比发现PtCu NCDs(1.07 mA·cm^-2)是商业Pt/C(0.55 mA·cm^-2)的1.95倍。而且,PtCu NCDs(2.76)比商业Pt/C催化剂(1.02)表现出更高的I_f/I_b比值。这些优异的电催化活性可能归功于PtCu NCDs特殊的凹形树突状形貌。     

CuI‐Catalyzed Multicomponent Synthesis of Aminoindolizines from Aldehydes,Amines, and Alkynes under Solvent‐Free Conditions

A direct and efficient approach to 1‐aminoindolizines through three‐component one‐pot reaction of heteroaryl aldehydes, secondary amines and terminal alkynes catalyzed by CuI under solvent‐free conditions has been developed. This methodology provides a rapid access to substituted aminoindolizines with good yields (up to 97%).     

Copper(II)‐Catalyzed Tandem Synthesis of Substituted 3‐Methyleneisoindolin‐1‐ones

An efficient strategy for the synthesis of a variety of 3‐methyleneisoindolin‐1‐ones has been developed. The reaction proceeded from coupling of 2‐iodobenzamides (or 2‐bromobenzamides) and terminal alkynes via Cu(OAc)₂·H₂O/2,2′‐biimidazole catalyzed in DMF at 60°C and subsequent additive cyclization produced substituted 3‐methyleneisoindolin‐1‐ones in good to excellent yields.     

微乳液法合成白光LED NaLu(MO4)2:Eu3+/Eu3+,Tb3+(M=W, Mo)荧光粉

采用微乳液法制备NaLu(WO₄)_2-x(MoO₄)x:8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)/y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)系列荧光粉.通过X射线衍射(XRD)表征,所制样品的X射线衍射峰与标准卡片PDF#27-0729基本吻合,表明所制的样品为白钨矿结构,属于四方晶系.扫描电镜SEM显示制备的纳米粒子是梭子状的,粒径大约是110 nm.激发发射光谱显示,在Eu³⁺离子掺杂浓度为8%时,NaLu(WO₄)(MoO₄):Eu³⁺发光强度最大.NaLu(WO₄)_2-x(MoO)x :8%Eu³⁺(x=0, 0.5, 1.0, 1.5, 2.0)荧光粉在Mo/W比达到1:1(x=1)时发光强度最大,强烈的红光发射表明该材料可用于白光LED材料.该荧光粉在268、394和466 nm波长光激发下分别发出橙红色、黄色和淡黄色光,可以满足不同光色需要.NaLu(WO)(MoO):y%Eu³⁺,5%Tb³⁺(y=1, 3, 5, 7, 9)荧光粉,随着y值增大,从绿光区(x=0.278, y=0.514)进入白光区(x=0.356, y=0.373), (x=0.278, y=0.313),同时观察到Tb³⁺到Eu³⁺有效能量传递.     

基于闭环二苯醚与磷氧基团的主体材料的合成及其在蓝色磷光有机发光二极管中的应用

本文通过多步有机反应制备了化合物9-苯基-9′-（4-二苯基氧化膦）苯基-氧杂蒽[diphenyl（4-（9-phenyl-9H-xanthen-9-yl）phenyl）phosphine oxide,DPPO],低温磷光发射光谱测试表明该化合物具有高的三线态能级（2.88eV）,它可以作为天蓝色磷光发光材料双（4,6-二氟苯基吡啶-N,C2）吡啶甲酰合铱[bis（3,5-difluoro-2-（2-pyridyl）phenyl-（2-carboxypyridyl）iridium（Ⅲ）,FIrpic,ET=2.62eV]的主体材料.将主体材料DPPO用于蓝色磷光有机发光二极管中,该器件在100cd/m2的亮度下,电流效率和流明效率分别达到30.6cd/A和19.2lm/W,最大外量子效率达到13.6%.     

中药柴胡总皂苷急性肝毒性的代谢组学研究

运用UPLC-MS联用技术对空白对照组、柴胡总皂苷(SS)组大鼠在给药后第3天和第5天的尿液样本进行分析检测,获得了以质荷比和保留时间为变量的矩阵数据。据此建立各组大鼠的尿液代谢轮廓图,并利用主成分分析(PCA)建立了SS的代谢组学毒性模型。结合肝组织病理,探讨了柴胡总皂苷的急性肝毒性。对于SS组与正常组,大鼠尿液代谢轮廓图表现出了一定的差异。在代谢组学毒性模型中,给药第3天和第5天的PCA分类均偏离正常组,而第5天的偏离程度强于第3天。同时,在第5天的肝组织病理切片中发现了组织病变。由此表明,给药组大鼠的代谢组偏离了正常组,这种偏离正是肝急性毒性的表现,且给药到第5天的肝毒性强于第3天,表明肝毒性与给药累积剂量呈正相关,表现出了明显的急性和累积肝毒性。     

Magnetic separation of heavy metal ions and evaluation based on surface‐enhanced Raman spectroscopy: Copper(II) ions as a case study

A new approach was developed for the magnetic separation of copper(II) ions with easy operation and high efficiency. p‐Mercaptobenzoic acid served as the modified tag of Fe₂O₃@Au nanoparticles both for the chelation ligand and Raman reporter. Through the chelation between the copper(II) ions and carboxyl groups on the gold shell, the Fe₂O₃@Au nanoparticles aggregated to form networks that were enriched and separated from the solution by a magnet. A significant decrease in the concentration of copper(II) ions in the supernatant solution was observed. An extremely sensitive method based on surface‐enhanced Raman spectroscopy was employed to detect free copper(II) ions that remained after the magnetic separation, and thus to evaluate the separation efficiency. The results indicated the intensities of the surface‐enhanced Raman spectroscopy bands from p‐mercaptobenzoic acid were dependent on the concentration of copper(II) ions, and the concentration was decreased by several orders of magnitude after the magnetic separation. The present protocol effectively decreased the total amount of heavy metal ions in the solution. This approach opens a potential application in the magnetic separation and highly sensitive detection of heavy metal ions.     

Adsorption of Polycyclic Aromatic Hydrocarbons on Graphene Oxides and Reduced Graphene Oxides

Graphene has attracted increasing attention in multidisciplinary studies because of its unique physical and chemical properties. Herein, the adsorption of polycyclic aromatic hydrocarbons (PAHs), such as naphthalene (NAP), anthracene (ANT), and pyrene (PYR), on reduced graphene oxides (rGOs) and graphene oxides (GOs) as a function of pH, humic acid (HA), and temperature were elucidated by means of a batch technique. For comparison, nonpolar and nonporous graphite were also employed in this study. The increasing of pH from 2 to 11 did not influence the adsorption of PAHs on rGOs, whereas the suppressed adsorption of NAP on rGOs was observed both in the presence of HA and under high‐temperature conditions. Adsorption isotherms of PAHs on rGOs were in accordance with the Polanyi–Dubinin–Ashtahhov (PDA) model, providing evidence that pore filling and flat surface adsorption were involved. The saturated adsorbed capacities (in mmol g^?1) of rGOs for PAHs calculated from the PDA model significantly decreased in the order of NAP>PYR>ANT, which was comparable to the results of theoretical calculations. The pore‐filling mechanism dominates the adsorption of NAP on rGOs, but the adsorption mechanisms of ANT and PYR on rGOs are flat surface adsorption.     

Facile and Clean Synthesis of Furopyridine Derivatives via Three-Component Reaction in Aqueous Media Without Catalyst

A series of furo[2′,1′:5,6]pyrido[2,3-d]pyrimidine derivatives were synthesized via the three-component reaction of an aldehyde, tetronic acid, and 6-amino-1,3-dimethyl-pyrimidine-2,4-dione in aqueous media without the use of catalyst. This protocol has the advantages of better yields, less cost, reduced environmental impact, and convenient procedure.     

An Efficient Synthesis of New Dispiropyrrolidine Derivatives via Three‐Component 1,3‐Dipolar Cycloaddition Reaction

A series of new dispiropyrrolidine derivatives were synthesized via the three‐component 1,3‐dipolar cycloaddition reaction of azomethine ylides generated in situ by the decarboxylative condensation of acenaphthenequinone and sarcosine or l ‐thioproline with 5‐benzylidene‐1,3‐dimethylpyrimidine‐2,4,6‐trione. The structures of the products were identified by IR, ¹H‐NMR, and HRMS spectra.